Mass spectrometer with an autosampler tray of vials on a lab bench

Peptide Mass Spectrometry Explained: Reading the MS Section of a Report

Most analytical reports for research peptides carry two headline results: a purity figure and a mass result. Everyone looks at the purity number first. Peptide mass spectrometry answers a more basic question, though: is the stuff in the vial actually the molecule it's supposed to be? This is our plain-English walk through the MS section of a report, so next time you can read it instead of scrolling straight past.

Mass spectrometer with an autosampler tray of vials on a lab bench

Purity and identity aren't the same question

Chromatography (usually HPLC) tells you how much of the detected material sits in the main peak compared with everything else. That's purity. Mass spectrometry tells you the mass of the molecules present. That's identity. A sample can be beautifully pure and still be the wrong compound, and the right compound can still carry impurities, which is why a useful report generally has both. If the purity side needs a refresher, our guide to what 98% and 99% purity actually mean covers it.

It's a bit like a parcel. The tracking number tells you it's the right box; whether what's inside is in good nick is a separate check. MS is the tracking number.

How peptide mass spectrometry works

Here's the short version. A mass spectrometer turns molecules into charged particles called ions, sorts them by their mass relative to their charge, and counts how many arrive at the detector at each value. For peptides the usual approach is electrospray ionisation, which gently adds protons so the molecule carries one or more positive charges. What you see on the report is that result plotted as a spectrum: a row of peaks along a horizontal axis.

How mass spectrometry confirms identity: ionise, separate by m/z, detect, with illustrative 1+, 2+ and 3+ peaks and expected versus observed mass
Illustrative diagram.

The horizontal axis is the bit that trips everyone up. It's labelled m/z, meaning mass divided by charge, not plain mass. A peptide carrying one extra proton shows up at roughly its mass plus one. The same peptide carrying two protons shows up at roughly half of its mass plus two. So a peak at a given m/z isn't automatically the mass of the molecule. You need to know, or work out, the charge first.

The vertical axis is relative intensity, usually scaled so the tallest peak reads 100%. It reflects how readily something ionised and got detected, not simply how much of it is there. A tall peak isn't proof of quantity, and a small one isn't automatically trivial.

Why there's more than one peak

Bigger peptides often pick up different numbers of protons, so one molecule shows up as a little family of peaks: one for the 2+ charge state, one for 3+, another for 4+ and so on. They sit at different m/z values but all point back to the same mass. Software can “deconvolute” that family into a single calculated mass, and plenty of reports quote that figure. A neat, evenly patterned run of peaks is usually just charge states doing their thing, not contamination.

You'll also see small clusters sitting next to the main peaks. Carbon, nitrogen and other elements naturally exist in slightly heavier forms, so a high-resolution spectrum shows isotope peaks spaced by about one mass unit divided by the charge. That's part of the molecule's normal fingerprint. And sometimes a sodium or potassium ion latches on in place of a proton, giving a peak a little heavier than the main one (around 22 units heavier for sodium on a singly charged ion). These adducts come from traces of salt in the sample or the instrument and, on their own, aren't a sign the material is impure.

Benchtop mass spectrometer in a bright laboratory with a tray of capped sample vials

Expected mass versus observed mass

A well-presented report gives you two numbers: the theoretical mass calculated from the peptide's sequence and the observed mass the instrument actually measured. The closer they are, the stronger the identity confirmation. How close is close enough depends on the instrument's resolution, so check the method stated on the report.

Two small traps to watch for. Theoretical mass can be monoisotopic (using the most common isotope of each element) or average (weighting in all the natural isotopes), and for a mid-sized peptide those can differ by a unit or more, so make sure the report compares like with like. And peptides are often supplied as salts, such as acetate or trifluoroacetate. The counter-ion adds to the weight of powder in the vial but isn't part of the peptide's molecular mass, so don't expect to see it in the identity result.

It's also worth knowing what MS can't do. It isn't normally used to state a percentage purity; that's the chromatography's job. It doesn't confirm how much is in the vial, which is a separate assay or content measurement. It can't always tell apart molecules that share the same mass, like some sequence variants, which is one reason identity is best backed up by more than one technique. And it only describes the sample that was tested, so matching the report to your own material still matters.

Our guide to reading a peptide COA shows where the MS section usually sits in a full report, and our piece on reading an HPLC chromatogram covers the purity side in the same plain style.

We publish third-party COAs with verification links for a number of our products on our COAs page. If you can't find one for the product you're looking at, flick us an email at support@ascendaus.com and we'll tell you what we've got.

Frequently asked questions

What does m/z mean on a mass spectrum?

It's the mass-to-charge ratio. Each peak shows an ion's mass divided by its charge, so a peptide carrying two charges turns up at roughly half its mass.

Why does a peptide mass spectrum show several peaks?

Usually because the same molecule picked up different numbers of charges, plus small isotope peaks and the odd salt adduct. Together that's a normal pattern for one compound.

Is a sodium adduct peak a sign of contamination?

Not by itself. Sodium and potassium adducts are common in electrospray MS and come from trace salts. They're only a concern if the report flags them or they unexpectedly dominate the spectrum.

How close should the observed mass be to the expected mass?

It depends on the instrument. High-resolution methods can agree within a few parts per million, while lower-resolution ones may report to within about one mass unit. The method on the report tells you which.

Can mass spectrometry tell me how pure a peptide is?

Not on its own. MS confirms identity, and purity normally comes from a chromatography method like HPLC. A complete report usually has both.

Research use only. For laboratory research use only. Not for human or animal consumption, and not for therapeutic or diagnostic use.

Cheers,
Ascend Team

Back to blog